Granite Countertop Installation in Maple Grove, MN | Natural Stone Countertops

Maple Grove Custom Kitchens provides granite countertop installation with careful planning, accurate measurements, and a solid cabinet base. The process includes choosing a slab layout, fitting and leveling the stone, sealing the surface, and handling any old countertop safely. Granite is a natural igneous stone quarried in blocks and cut into slabs, and each piece has its own veining, speckling, and color variation. We install granite on kitchen perimeter runs, islands, peninsulas, and bathroom vanities, with cutouts for undermount sinks, cooktops, and faucets. Edge profiles include eased, beveled, bullnose, ogee, and waterfall styles, and finishes range from polished and honed to leathered. Our crew checks that base cabinets are level and well supported, since granite slabs are heavy, then secures the stone with adhesive and silicone and fits seams so they stay tight. We also handle backsplash transitions, overhangs for seating, sink and plumbing reconnection, and removal of old countertops.


A professional installation helps your granite countertops fit securely, align cleanly, and suit your kitchen or bathroom. We'll explain the key steps, service options, and costs so you know what to expect before work begins. This includes slab selection, sealing and maintenance, heat and scratch resistance, edge details, cutouts, and how slab size and thickness can affect the price.

Our Granite Countertop Installation Services

Our granite countertop installation service can include measuring the space, preparing the base cabinets, cutting and fitting the slabs, and sealing the seams. We confirm the layout and discuss slab choices before fabrication.

We can also fit an undermount sink by securing it beneath the countertop and sealing the joint. Plumbing connections may require a separate plumber, so confirm who will handle that work before installation. Before work begins, clear the counters and nearby cabinets. Our team removes the old surface when included in the service, then checks that the cabinets can support the new stone.

Granite Countertop Sealing

After installation, let the granite and any seam or adhesive work cure as directed by the installer. Clean the surface and allow it to dry fully before applying a granite sealer.

Check whether the stone needs sealing with a few drops of water in an inconspicuous spot. If the water darkens the granite or soaks in within several minutes, apply a penetrating stone sealer made for natural stone. If it stays beaded, the surface may not need sealing yet.

Follow the sealer label for application, wait time, and number of coats. Work in small areas, spread the product evenly, and wipe away excess before it dries to prevent a hazy film. Keep the countertop dry for the time stated on the label.

Repeat the water test as part of routine care. Reseal when water begins to absorb into the stone, using the product directions and the granite supplier’s advice.

Granite Slab Layout Planning

Before fabrication, the Maple Grove Custom Kitchens team plans where each granite slab will sit and how the countertop pieces will be cut. A clear layout helps align natural patterns across adjoining sections and place seams where they are less visible.

You can review the slab in person and mark the areas you want used for key surfaces, such as an island or a prominent counter run. Check the planned positions of sinks, cooktops, faucets, and cutouts, since these affect how the fabricator divides the stone.

Ask the fabricator for a layout drawing that shows the cuts, seams, overhangs, and edge details. Confirm that the drawing matches your cabinet measurements and that the grain or color flow works across seams. Natural variation means granite slabs can differ in pattern, so approve the selected slab before cutting begins.

For multiple slabs, confirm which pieces will go in each area and how their patterns will meet. Our Maple Grove Custom Kitchens experts recommend recording your approval of the slab and layout before fabrication starts.

Granite Countertop Leveling and Alignment

Maple Grove Custom Kitchens checks that the cabinets are sturdy, dry, and level before setting the granite. Use a long level across the cabinet tops and shim low spots where needed. Uneven support can stress the stone and cause seams or edges to sit unevenly.

Dry-fit each slab first. Check that it sits flat, lines up with walls and cabinet fronts, and leaves the planned overhang. At seams, align the edges and surfaces carefully. A seam setter can hold adjoining pieces level while you make small adjustments.

Once the pieces align, apply silicone adhesive at the cabinet supports as directed by the stone supplier. Join seams with color-matched epoxy, then remove excess material and check the surface again before the adhesive cures. Follow the product’s instructions for setting and curing times.

Granite Countertop Removal and Disposal

Before installing new granite, our Maple Grove Custom Kitchens specialists remove the old countertop carefully to protect the cabinets, walls, and plumbing. The crew shuts off water and gas lines when needed, disconnects fixtures, and clears the work area. Granite slabs are heavy, so trained help and proper lifting equipment reduce the risk of injury.

The removal method depends on how the countertop is attached. The Maple Grove Custom Kitchens team loosens fasteners and cuts through adhesive where possible. If the slab cannot be lifted in one piece, installers break it into smaller sections with suitable safety gear and dust control.

Granite in good condition may be reused or donated if its size and cutouts suit another project. For disposal, check local rules for stone and construction waste. Professional removal and disposal often cost about $300 to $800, while some estimates range from $300 to $1,250 based on slab size, thickness, access, and disposal needs.

Our Granite Countertop Installation Process

Maple Grove Custom Kitchens starts by confirming the cabinet layout, checking that the cabinets are level and sturdy, and measuring for the sink, cooktop, and countertop edges. A professional fabricator uses a template to plan the slab cuts and seam locations. The cabinets may need added support, especially around long spans and overhangs.

After fabrication, installers dry-fit each piece to check the fit and seams. They then set the granite on the cabinets and join sections with color-matched two-part epoxy. Installers level the surface and support it while the adhesive cures.

Our Maple Grove Custom Kitchens professionals recommend leaving plumbing and appliance cutouts to an experienced fabricator, since granite can crack if cut or handled poorly. Installers seal gaps where the countertop meets a wall or sink with silicone caulk. They clean the surface and apply stone sealer when the granite type and manufacturer instructions call for it.

Why Choose Maple Grove Custom Kitchens


  • 23 years of remodeling experience: Our team brings over two decades of experience planning and completing kitchen renovations for homeowners.
  • Minnesota licensed residential remodeler: We maintain the required Minnesota Residential Remodeler license for qualifying residential remodeling work.
  • Complete project coordination: We coordinate cabinetry, plumbing, electrical work, ventilation, countertops, and installation around one remodeling plan.
  • Detailed planning and communication: Homeowners receive clear estimates, project schedules, and regular updates from design through installation.
A kitchen with white cabinets and marble counter tops

Get a Free Quote!

How Much Does Granite Countertop Installation Cost

in Maple Grove, MN?

Granite countertop installation generally costs $65 to $210 per square foot, including material, fabrication, and installation. For a 50-square-foot project, that puts the estimated total at $3,250 to $10,500.

The final price depends on the stone’s grade, color, and thickness, as well as the edge style and surface finish. Sink and cooktop cutouts, seams, backsplash work, old countertop removal, and difficult access can add to the bill.

Ask fabricators for written quotes that list materials, fabrication, installation, and any extra fees separately. Maple Grove Custom Kitchens recommends comparing quotes based on the same countertop measurements and features, since different project details can change the total.

Why Choose Us for Granite Countertop Installation in Maple Grove, MN

Granite countertop installation in Maple Grove, MN brings natural stone's one-of-a-kind patterns and heat resistance into your kitchen. Maple Grove Custom Kitchens guides you from slab selection through final sealing.


  • Slab selection support: We help you choose a slab in person so you know exactly which patterns and colors will appear in your kitchen.
  • Safe handling: A 3 cm granite slab weighs roughly 18 pounds per square foot, and our crew has the equipment and experience to install it safely.
  • Sealing at installation: Every granite surface receives a penetrating sealer to protect against stains and moisture.
  • Custom edge profiles: Choose eased, bullnose, beveled, or ogee edges to match your kitchen style.

Granite Countertop Installation FAQs

How much does it cost to install granite countertops?

Granite countertop installation often costs about $40 to $100 per square foot, including fabrication and installation. The final price depends on the stone, project size, edge style, sink and cooktop cutouts, and local labor rates. Ask Maple Grove Custom Kitchens for an itemized quote that lists the slab, fabrication, removal of old counters, delivery, and installation. Complex layouts or extra seams can raise the cost.

How are granite countertops attached to cabinets?

The Maple Grove Custom Kitchens team sets the granite on a level, stable cabinet base. Installers use small beads of construction adhesive to secure the stone, with support added where the design or overhang requires it. Installers join separate pieces with color-matched epoxy adhesives. They align the surfaces, clamp the seam, and remove excess epoxy after it sets.

Can I install granite countertops myself?

Yes but our Maple Grove Custom Kitchens experts recommend hiring a professional stone fabricator and installation crew. Granite slabs are heavy and can crack if they are carried, lifted, or supported incorrectly. Fabricators also use specialized tools to cut the stone and finish edges. A DIY project may work for a small, simple piece if you have the right equipment and help. Large slabs, sink cutouts, and seams call for professional handling.

How long does granite countertop installation take?

The on-site installation often takes a few hours for a standard kitchen. A larger kitchen or one with several seams, cutouts, or access challenges can take longer. The full process takes more time because installers first measure and template the cabinets, then fabricate the stone. Our Maple Grove Custom Kitchens specialists provide a complete schedule, including templating, fabrication, delivery, and installation.

What preparation is needed before granite countertops are installed?

Clear the counters and nearby work areas. Disconnect plumbing and appliances as needed, and arrange for old countertops to be removed before the new stone arrives. Make sure the cabinets are firmly attached, level, and ready to support the granite. Keep pets and children away from the work area during delivery and installation.

Do granite countertops need to be sealed after installation?

Some granite needs sealing after installation, while some stones have low absorption and need less frequent care. Consult Maple Grove Custom Kitchens professionals to determine whether your specific slab needs a sealer and when to apply it. If the stone needs sealing, follow the product directions and let the surface dry for the stated time before using it. Sealers reduce liquid absorption, but you should still wipe up spills promptly.